Back to SORRA website -> Forum Home -> Tech -> Kombi flywheels
Post Info TOPIC: Kombi flywheels
nt


Forum Addict

Status: Offline
Posts: 76
Date:
Kombi flywheels
Permalink  

Is there a difference in the size ( diameter across face) of flywheels between the 2lt gearbox flywheel and the 1.8lt gearbox flywheel ??

__________________
Lamby


In rehab

Status: Offline
Posts: 172
Date:
Permalink  

not that i know of, but a 2l watercooled runs a 220mm clutch but they are not that common and they are still the same outside diameter.

__________________
tine


Rehab Dropout...

Status: Offline
Posts: 276
Date:
Permalink  

i do a bit of work on combis and clutch kits always a problem,they are different between the models,the one everyone uses is the 200mm 1600 flywheel,most performance clutch kits are 200mm,combis 1800-210mm,2lt-215mm/220mm later combi,so yes,,

__________________
Lamby


In rehab

Status: Offline
Posts: 172
Date:
Permalink  

Clutches may be different but the actual outside diameter of the flywheel will all be the same

__________________
tine


Rehab Dropout...

Status: Offline
Posts: 276
Date:
Permalink  

face usually means where the clutch runs otherwise its just the od,yes your right the od is the same, the flywheels interchange

__________________
nt


Forum Addict

Status: Offline
Posts: 76
Date:
Permalink  

Sorry I ment the outside diameter, the problem I have is I'm changing engines from Mazda B6 to SR20. The B6 flywheel is 270mm across OD and SR20 flywheel is 276mm across OD. Was just trying to figure out what this SR20 flywheel was made for and if it will work in 1.8lt kombi box.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Back to SORRA website -> Forum Home -> Tech -> Kombi flywheels
Tweet this page Post to Digg Post to Del.icio.us
Members Login
Username 
 
Password 
    Remember Me  


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard