hi guys, im looking at fitting a pair nof ges bump stops to the rear of the rivy , and was wonderin where to positon them, as the frame currently bottoms out on full compression. i also suspect the torsion bars are a tad bit to light, and will be looking at fitting a light coil to help. cheers jero,fez,jeremy
__________________
were we're goin we dont need roads.
it's not the speed of life that scares me, it's the sudden stop at the end ,
we set the rivvy up so it was 75mm off the ground at full bump and found that it was OK except when we were running really soft in the rear. We set up the wolf up at the same. At rocky/rough tracks (crookwell/colo) we raised the car a bit, at smooth tracks (dondingalong) we dropped it back down.
We ran a standard type 3 torsion bar and 2 12" ausshocks in each corner in the rear, one shock on each side ran coils. Couldnt tell you what they were valved or shocked at though as Crofty set them up on the phone with Andrew, but can tell you they worked very well!
__________________
Green Sally up. Green Sally down. Lift and squat, gonna tear the ground.
